(63/325) 2022-05-19_20-16-30.jpg
1/2" loc-line for gooseneck light and vacuum.
62: Modifying D-bit - Deckel style grinder.. Vaccum is manditory - lots of open parts that get coated in grit.. Need to clean befor moving and adjustment.
61: Open tubes of RTV(silicone caulk) won't plug up if stored with a desicant (blue stuff on the bottom).
60: I made a wheel tool for the D-bit Deckel style grinder.
59: Books I've read
58: Part of U2-deckel style grinder
57: 2022-05-15_03-43-59.jpg
56: water drain goes to filter so the drain valve doesn't get plugged..
55: The never ending nightmare of a compressed air system.
54: The never ending nightmare of a compressed air system.
53: Deckel clone - U2 grinder If you look at the bottom where the blue and metal meet - they put in a helicoil - and poped out where is shouldn't be..
64: Making loc-line attachment for lamp
65: Making loc-line attachment for lamp
66: Computer case with SLOW and quite fan.
67: milimess 1um with release
68: mm engraved and inked - inking takes multiple coats of ink-stick.
69: Pair of holes on the front edge were for pins. Dates back when they used iron surface plates and there was a ground front edge that the pins could align to.
70: Very strange infection/bruise ??
71: Lots of joints in Deckle style SO D-bit grinders.
72: Mitutoyo indicator - missing screw.
73: Mitutoyo indicator - Plastic lens? Cracked in two places..
