(21/325) 2022-04-11_17-03-49.jpg
Bench feet - button head with nut locktited on for adjustment.
20: Bench feet - button head with nut locktited on for adjustment.
19: Decking vice anvil..
18: Milling sphere to mate with button head screws for bench feet.
17: Milling sphere to mate with button head screws for bench feet.
16: Sold this - worked well but requires a cell phone that will become obsolete. Will replace with a stand alone unit.
15: Sold this - worked well but requires a cell phone that will become obsolete. Will replace with a stand alone unit.
14: Sold this - worked well but requires a cell phone that will become obsolete. Will replace with a stand alone unit.
13: Angle grinder - Changed grease - got noisy.
12: Cheap mag base drill overhaul - the counter sinks dimpled the ways - caused it to bind. Ground out the dimples and stoned the ways flat. Chinese equipment should be thought of as a DIY kit.
11: This is a plumers compression ring cutter that is no longer available - Lots of machining steps.
22: Meger tooling that was to come with the EMCO lathe I decided not to get
23: Meger tooling that was to come with the EMCO lathe I decided not to get
24: Meger tooling that was to come with the EMCO lathe I decided not to get
25: Meger tooling that was to come with the EMCO lathe I decided not to get
26: Meger tooling that was to come with the EMCO lathe I decided not to get
27: Meger tooling that was to come with the EMCO lathe I decided not to get
28: 2022-04-14_21-48-06.jpg
29: Working on installing 20 Ton press into the bench.
30: Mini-Din rail to install accordian gaurding for the mill
31: 20 Ton Press install finished.