(49/325) 2022-05-04_20-00-03.png
Used for inking ruler.
48: Inked with solid stick.
47: torque screw drivers are the deal..
46: Saw modifications: Chip catcher Drilled plate for holding small things Pressure gauge to cut consistantly (should be flow meter?)
45: LinuxCNC running a ruller engrave.
44: 2022-05-03_18-17-28.jpg
43: cutting
42: Broken straight edges
41: Broken straight edges
40: Testing the cut depth
39: Example of HDR messing up - double image.
50: Deckel clone - U2 grinder
51: Deckel clone - U2 grinder Tiny way slide - a bit wonky
52: Deckel clone - U2 grinder The knob on the left grips on threads - I put in a bit of brass rod. The gib falls out if changing heads - put a bit of RTV to see if it will stay in place.
53: Deckel clone - U2 grinder If you look at the bottom where the blue and metal meet - they put in a helicoil - and poped out where is shouldn't be..
54: The never ending nightmare of a compressed air system.
55: The never ending nightmare of a compressed air system.
56: water drain goes to filter so the drain valve doesn't get plugged..
57: 2022-05-15_03-43-59.jpg
58: Part of U2-deckel style grinder
59: Books I've read
