Disclaimer

This information HAS errors and is made available WITHOUT ANY WARRANTY OF ANY KIND and without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. It is not permissible to be read by anyone who has ever met a lawyer or attorney. Use is confined to Engineers with more than 370 course hours of engineering.
If you see an error contact:
+1(785) 841 3089
inform@xtronics.com

Asus TUF Z270 Mark 1 MB

Chips

Nuvoton sensor chip NCT6793D chip ID 0xd121 logical device B has address 0x290

Links

Asus forum
http://vip.asus.com/forum/topic.aspx?board_id=1&model=TUF+Z270+MARK+1&SLanguage=en-us

Notes

The assistant fan should not be thought of as optional - and yet it is problematic. They forgot to specify it completely - it is a 40mm Fan 10mm thick - you want a 4-pin version that is hard to find. Could be that for high demand applications, removing the 'armor' inorder to cool the Z270 chip is a good idea.

Linux command line - /etc/default/grub

GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_enforce_resources=lax"

lm-sensors config at: /etc/sensors.d# cat local.conf

chip "nct6793-isa-0290"
ignore in0
   set in1_min 1 * 0.95
   set in1_max 1 * 1.05
   set in2_min 3.3 * 0.90
   set in2_max 3.3 * 1.10
   set in3_min 3.3 * 0.90
   set in3_max 3.3 * 1.10
   set in4_min 1.0 * 0.90
   set in4_max 1.0 * 1.10
   ignore in5
   ignore in6
   set in7_min 3.3 * 0.90
   set in7_max 3.3 * 1.10
   set in8_min 3.3 * 0.90
   set in8_max 3.3 * 1.10
   set in9_min 1 * 0.95
   set in9_max 1 * 1.05
   ignore in10
   set in11_min 1 * 0.90
   set in11_max 1 * 1.10
   set in12_min 1.1 * 0.95
   set in12_max 1.1 * 1.05
   ignore in13
   ignore in14
label fan1 "case-right-front_fan"
   set fan1_min 100
label fan2 "cpu_fan"
   set fan2_min 100
   set fan3_min 100
label fan4 "case-back-right_fan"
   set fan4_min 100

   ignore fan5
label fan6 "case-right-left_fan"
   set fan6_min 100
#ignore   PCH_CHIP_CPU_MAX_TEMP
#ignore   PCH_CHIP_CPU_TEMP
ignore intrusion0

chip "asus-isa-0000"
ignore fan1_input