Disclaimer

This information HAS errors and is made available WITHOUT ANY WARRANTY OF ANY KIND and without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. It is not permissible to be read by anyone who has ever met a lawyer or attorney. Use is confined to Engineers with more than 370 course hours of engineering.
If you see an error contact:
+1(785) 841 3089
inform@xtronics.com

Intel D865PERL.conf

# Sensors configuration file used by 'libsensors' -(/etc/sensors.conf
# #
# PLEASE READ THIS HELPFUL HINT!!! #
# #
# The 'set' lines (generally for min and max values) #
# do not take effect until you run 'sensors -s' as root !!! #
#
# Explainations of this file are found with "man sensors.conf " or at
# the top of the stock sensors.conf file.

###
chip "lm85c-*" "adm1027-*" "adt7463-*" "lm85-*" "lm85b-*"

 set temp1_max 50

# Voltage inputs
 label in0 "V1.5" # AGP on Intel S845WD1-E
 label in1 "VCore"
 label in2 "V3.3"
 label in3 "V5"
 label in4 "V12"

# Temperature inputs
 label temp1  "CPU"
 label temp2  "Board"
 label temp3  "Remote"

# Fan inputs
 label fan1 "CPU_Fan"
 label fan2 "Fan2"
 label fan3 "Fan3"
 label fan4 "Fan4"

# PWM Outputs
 label pwm1 "CPU_PWM"
 label pwm2 "Fan2_PWM"
 label pwm3 "Fan3_PWM"

# Voltage scaling is done on-chip.  No 'compute' directive
# should be necessary.  If in0 has external scaling set
# it here.

# compute in0  @ * 2.5, @ / 2.5

# Adjust fans speeds for actual pulses per rev
# compute fan1  @ * 2,  @ / 2 # 1 pulse per rev
# set fan1_ppr  1 # ADM1027 or ADT7463
# compute fan2  @ / 2,  @ * 2 # 4 pulse per rev
# set fan2_ppr  4 # ADM1027 or ADT7463

# Ignore fans you (or your motherboard) don't have
# ignore fan2
# ignore fan3
# ignore fan4

# Set VRM version
 set vrm  9.1 # Pentium 4

# Set voltage limits
 set in0_min  1.5 * 0.95
 set in0_max  1.5 * 1.05
 set in1_min  vid * 0.94
 set in1_max  vid * 1.05
 set in2_min  3.3 * 0.95
 set in2_max  3.3 * 1.05
 set in3_min  5.0 * 0.98
 set in3_max  5.0 * 1.02
 set in4_min 12 * 0.95
 set in4_max 12 * 1.05

# Set Fan limits
 set fan1_min 2501
 set fan3_min 3000
 set fan4_min 1000
# Set Temp Limits
 set temp1_min 10
 set temp1_max 41
 set temp2_min 10
 set temp2_max 37
 set temp3_min 10
 set temp3_max 37