(45/55) 2026-07-07_17-10-42.jpg
An attempt to unscrew a broken tap.
44: I ordered M1.4 - they sent me M1.6 - but it measured M1.8
43: I ordered M1.4 - they sent me M1.6 - but it measured M1.8
42: 2026-06-20_21-34-09.jpg
41: Norma wants to look like a duck?
40: I can't remember who made which ones?
39: 4 types of high fire glaze - White, White-gloss, light-blue, blue with speckles..
38: Finally cleaned the big bench
37: Turned out nice..
36: Finally did something on the mill again
35: My cat finds things that smell like me
46: Instead of welding - I brased the back rest back on my chair - the tube is very thin walled.
47: Had to cut and flame polish a bit of tube.
48: Milled out a broken probe end - then drilled and re tapped the hole.
49: Milled out a broken probe end - then drilled and re tapped the hole.
50: Tiny taps and die.
51: Had to modify a chuck key.
52: Had to modify a chuck key. - this is a 1/4" Cushman made in Japan
53: I added a lens to the little wifi video camera so it focuses close.
54: Here it is with the spindle at 100RPM - works like a charm.
55: It has a magnetic base so it sticks to tool holders
